Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:

- b -

• base_address : dma_channel_attr_t
• baud_rate : uart_config_t
• bcr : i3c_target_id_t
• bit_clk_gated : i2s_clock_mode_t
• bit_clk_inv : i2s_clock_mode_t
• block_size : dma_sw_trigger_config_t, i2s_config_t
• blockSize : sdio_data_config_t
• both_edge_int : gpio_pin_config_t
• break_detected : uart_usr_lsr_status_bits_t
• brs : can_rx_fd_header_t, can_tx_frame_t
• buf : i2c_blocking_config_t, i2c_nonblocking_config_t, i3c_sir_config_t, i3c_transfer_t
• buffer : dmic_buffer_context_s, dmic_dma_config_s
• buffer_bytes : dmic_dma_config_s
• buffer_modes : dmic_capability_s
• buffer_size : dmic_buffer_context_s
• bus_avail_timing : i3c_controller_config_t
• bus_available_time_ns : i3c_target_config_t
• bus_free_time_mixed_ns : i3c_bus_avail_timing_t
• bus_free_time_pure_ns : i3c_bus_avail_timing_t
• bus_idle_time_ns : i3c_target_config_t
• busSpeed : sdio_sd_card_config_t
• busWidth : sdio_sd_card_config_t
• busy_not_used : uart_usr_lsr_status_bits_t