Data Structures

Here are the data structures with brief descriptions:

Cdma_1d_config_t	DMA 1D transfer configuration
Cdma_2d_config_t	DMA 2D transfer configuration
Cdma_auto_restart_config_t	DMA auto-restart configuration
Cdma_channel_attr_t	DMA channel request configuration and capabilities
Cdma_channel_config_t	DMA channel configuration
Cdma_hw_trigger_config_t	DMA hardware trigger configuration
Cdma_sw_trigger_config_t	DMA software trigger configuration
Cdma_template_config_t	DMA template configuration (used with 1D transfers only)
Cgpio_pin_config_t	Configuration for a single GPIO pin
Ci2c_blocking_config_t	Blocking transfer configuration
Ci2c_controller_config_t	I²C controller configuration structure
Ci2c_nonblocking_config_t	Non-blocking transfer configuration
Ci2c_target_config_t	I²C target configuration structure
Cpinmux_config_all_t	Combined configuration for electrical parameters and function routing
Cpinmux_elec_config_t	Electrical characteristics configuration for a pin
Csdio_cmd_config_t	SD Host command configuration structure
Csdio_config_t	SD Host initialization configuration structure
Csdio_data_config_t	The SD Host data transfer configuration structure
Csdio_sd_card_config_t	SD card configuration structure
Csdio_write_read_config_t	SD Host Write/Read structure
Cspi_config	SPI configuration structure
Cspi_xfer_config	SPI transfer configuration structure
Cuart_config_t	UART control configuration structure
Cuart_get_config_t	UART receive configuration structure
Cuart_hw_status_t	UART instance hardware status structure
Cuart_put_config_t	UART transmit configuration structure
Cuart_usr_lsr_status_bits_t	Combined UART USR (Status Register) and LSR (Line Status Register) bitfield